weartore.blogg.se - Magtool software

#Magtool software update
#Magtool software upgrade
#Magtool software software

The folder name and the imageupdate file must contain only small letters (lowercase).

#Magtool software update

Recheck folder name, update files, file sources.

The STB does not start updating or does not detect folder or update files on USB-drive - USB-drive is not initialized ("Internal error" message, etc.):

#Magtool software software

Possible problems when updating software using USB-driveġ. Your browser does not support the HTML5 video element Put imageupdate and Bootstrap files in the directory mag.Download imageupdate and Bootstrap_ files from release.

#Magtool software upgrade

If you need to upgrade STB to public image:.Put imageupdate and Bootstrap files in the directory mag.

Download imageupdate file from manufacture's server:.Download B ootstrap_ file from release of required STB model.If you need to upgrade STB to factory image:.This type of update allows updating STB software to Public image. The Bootloader menu is launched by the user during STB boot. After software loads, STB will automatically reboot.The status of the software update is displayed by the progress bar and comments. To begin updating click Update (F1) in Software Update window.To reject the update click Cancel in Software Update window.Find out whether you need for updating by comparing Current and New versions.In Software Update window you can see descriptions of the software versions: the Current version (operating in STB) and New version (available on USB drive).If the file has been detected and can be read you'll see Software Update window.Select Verify (OK) to make sure that the STB detects imageupdate file.Path - Path to update file on the USB-drive.In the window Software update set Update method = USB.Open System settings ⇒ Software update.Connect prepared USB-drive to STB socket.Put the imageupdate file in the USB-drive directory mag. Download the imageupdate file from manufacture's server.Updating from the System Settings menu of the E mbedded portal allows updating STB software to the factory image. Create directory mag ( - basic model number: 250, 254 or 270) in a root directory of the USB-drive.In case of an update from the Bootloader, if your STB has more than one USB socket, a rear socket is used for the upgrade.If there are more than one partitions on the USB drive use the first one. The USB drive must have a FAT32 file system format.The required software version should be pre-downloaded and written to the USB-drive. STB software can be updated using USB-drive. Note! The string is available for editing via the virtual keyboard (brought up by KB key on RC) or USB keyboard. Software versions of STB are released to STB basic models (250, 254, 270).

STB software provided by manufacturer - public and factory images.

Image-making: Image-making (PublicImage, CustomImage, OperatorImage).

The following instructions should be taken into account: Updating STB to custom/other software images (that differs from the factory one) is performed in the Embedded portal (HTTP, USB) or in the MiddleWare menu. To update STB to Public image ( provided in Releases at ) it is necessary to use Bootloader menu Upgrade Tools (USB Bootstrap, MC Upgrade, and so on). Public and Factory software images can be updated from the Embedded portal (HTTP or USB update methods) to the Factory software image only.